黄色福利片-黄色福利-黄色短视屏-黄色短视频网站-欧美一区二区三区性-欧美一区二区三区在线观看

 您現在的位置：  
 首 頁 > HFSS > HFSS問答百科 > HFSS仿真過程中停在那里不動是什么原因？

HFSS仿真過程中停在那里不動是什么原因？

文章來源: 互聯網    錄入: mweda.com   

我在HFSS仿真過程中出現了以下這個問題：信息欄也沒有出現有錯誤的信息，但是仿真就是停在那里不動，不知道是什么原因，有知道的大俠沒有解釋一下！注意進程欄下面的“Surface recovery”是什么意思？


未命名.jpg


微波EDA (www.oijmkh01.cn) 網友回復：

  • 網友回復


    是不是因為網格劃分太多了？以前也遇到過類似的問題

  • 網友回復


    大俠能不能詳細的解釋一下呢。我的網格劃分應該是默認的，應該怎么改呢？

  • 網友回復


    是不是你所在盤的虛擬內存不夠？

  • 網友回復

    我出現過這個問題。如果你網格是默認的話，那就修改下你的掃頻的頻段。把頻率設置到低頻段，范圍改小一點，先算個結果出來，證明你這個模型沒有問題。
    然后，低頻的可以出來，高頻的就是你的機器配置可能有點低，到別人的機器上去算下，同時，有可能的話，自己再優化一下網格。

  • 網友回復

    antenna_03 (E:/ansoft-hfss/1/)
      HFSSDesign1
        [info] Translation Info: Log of translation is in E:/ansoft-hfss/1/antenna_xlation.log (3:06 と  きる 20, 2009)
        [error] Boundary Setup: An excitation must be defined in order to solve driven problems. (3:35 と  きる 20, 2009)
        [error] Solution Setup: No solution setups have been created. (3:35 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:47 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:47 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:50 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:50 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:52 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:52 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:55 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:55 と  きる 20, 2009)
        [warning] Boundary 'FiniteCond1': Assignment has changed due to geometry modifications. (4:05 と  きる 20, 2009)
        [warning] Geometry deletion/modification caused the mesh operation: 'Length1' to be rendered invalid. The mesh operation has been deleted as a result. (4:05 と  きる 20, 2009)
        [warning] Boundary 'FiniteCond1': Assignment has changed due to geometry modifications. (4:06 と  きる 20, 2009)
        [warning] Geometry deletion/modification caused the mesh operation: 'Length2' to be rendered invalid. The mesh operation has been deleted as a result. (4:06 と  きる 20, 2009)
        [error] Initial mesh, process mesh3d died unexpectedly. (4:07 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (4:07 と  きる 20, 2009)
        [error] Initial mesh, process mesh3d died unexpectedly. (4:08 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (4:08 と  きる 20, 2009)
        [error] Initial mesh, process mesh3d died unexpectedly. (4:09 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (4:09 と  きる 20, 2009)
        [warning] Geometry deletion/modification caused the mesh operation: 'Length2' to be rendered invalid. The mesh operation has been deleted as a result. (4:11 と  きる 20, 2009)
    這是我分析時出現的錯誤提示，請各位大哥指導一下。謝謝

  • 網友回復

    低頻的高頻的網格數有什么區別？我是新手　望指教

  • 網友回復

    好象　高頻的和有大電導率的都會分較多的網格　有高手能講一下嗎

申明：網友回復良莠不齊，僅供參考。如需專業解答，推薦學習李明洋老師的HFSS培訓視頻，或咨詢本站專家。

  • 上一個教程：
  • 下一個教程：